How to Thread a Sewing Machine. Guide How to Thread Any Models of Household Sewing Machines
This is an universal manual for threading any sewing machines and winding a bobbin such as brother, singer, kenmore, pfaff, singer old. Video with pro comments help you learn how to thread your sewing machine correctly. More information how to thread sewing machine see on my website: http://www.sewway.com/how-to-thread-a-sewing-machine.html
Start threading your sewing machine with winding a bobbin. Place the spool of thread on the spool pin and press the thread around the bobbin winding tension discs.
Place the bobbin onto the bobbin winding shaft and slide the shaft to the right. Turn the bobbin clockwise, by hand, until the spring on the shaft slides into the slit on the bobbin.
Gently press on the foot controller to wind the thread around the bobbin a few times, the stop the sewing machine.
Note: The sewing machine stops automatically when the bobbin is full.
To make it easier to adjust the thread tension in the stitch, use top and bottom threads of different colors.
Pull the needle thread between discs of thread tensioner. Now you need bring the thread through channel, around check holder spring. Insert the top thread through the take-up lever. At this step you need lower the thread down to the needle. Slide the thread through all hooks before insert it into needle.
Take the full plastic bobbin and insert it into bobbin case.
Holding a latch of bobbin case with your fingers push gently it into shuttle housing, until you hear a snap. It means that the bobbin case set in own place correct.
Make a test seam and check the degree both threads tension in the stitch.